加速命令(Speed up):

yum -y install wget
wget -N --no-check-certificate "https://raw.githubusercontent.com/chiakge/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh

SS & SSR 安装

wget --no-check-certificate -O shadowsocks-all.sh https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-all.sh
chmod +x shadowsocks-all.sh
./shadowsocks-all.sh 2>&1 | tee shadowsocks-all.log

SS 插件配置:

Download simple-obfs :\
https://github.com/shadowsocks/simple-obfs

Settings :\
obfs=http;obfs-host=tx.acgvideo.com

管理命令

# 启动、关闭、重启、状态
## Shadowsocks-Python
/etc/init.d/shadowsocks-python start|stop|restart|status
## ShadowsocksR
/etc/init.d/shadowsocks-r start|stop|restart|status
## Shadowsocks-Go
/etc/init.d/shadowsocks-go start|stop|restart|status
## Shadowsocks-libev
/etc/init.d/shadowsocks-libev start|stop|restart|status

# 各版本默认配置文件
## Shadowsocks-Python
/etc/shadowsocks-python/config.json
## ShadowsocksR
/etc/shadowsocks-r/config.json
## Shadowsocks-Go
/etc/shadowsocks-go/config.json
## Shadowsocks-libev
/etc/shadowsocks-libev/config.json

# 各版本默认配置文件
## Shadowsocks-Python
/etc/shadowsocks-python/config.json
## ShadowsocksR
/etc/shadowsocks-r/config.json
## Shadowsocks-Go
/etc/shadowsocks-go/config.json
## Shadowsocks-libev
/etc/shadowsocks-libev/config.json

config.json详解

## 基本配置
{
    "server": "0.0.0.0",
    "server_port": 8989,
    "password": "password",
    "method": "chacha20",
    "protocol": "origin",
    "protocol_param": "",
    "obfs": "plain",
    "obfs_param": "",
    "timeout": 120,
    "udp_timeout": 60,
    "fast_open": false,
    "workers": 2
}

## 参数说明
{
    "server": "0.0.0.0",    # 监听地址
    "server_port": 8989,    # 监听端口
    "password": "password", # 端口密码
    "method": "chacha20",   # 加密方式
    "protocol": "origin",   # 协议插件, origin: 原版协议
    "protocol_param": "",   # 协议插件参数
    "obfs": "plain",        # 混淆插件, plain: 不混淆
    "obfs_param": "",       # 混淆插件参数
    "timeout": 120,         # tcp超时
    "udp_timeout": 60,      # udp超时
    "fast_open": false,     # 需内核支持(3.7+), 在tcp握手的同时交换数据
    "workers": 2            # worker进程数量
}

## 多用户配置
{
    "server": "0.0.0.0",
    "port_password": {
        "8080": "password1",
        "8181": "password2",
        "8282": "password3"
    },
    "method": "chacha20",
    "protocol": "origin",
    "protocol_param": "",
    "obfs": "plain",
    "obfs_param": "",
    "timeout": 120,
    "udp_timeout": 60,
    "fast_open": false,
    "workers": 2
}

## 多用户 + 不同参数
{
    "server": "0.0.0.0",
    "port_password": {
        "8080": {
            "method": "aes-128-cfb",
            "protocol": "auth_sha1_v4",
            "protocol_param": "",
            "obfs": "tls1.2_ticket_auth",
            "obfs_param": "",
            "password": "password1"
        },
        "8181": {
            "method": "aes-256-cfb",
            "protocol": "auth_aes128_md5",
            "protocol_param": "",
            "obfs": "http_simple",
            "obfs_param": "",
            "password": "password2"
        },
        "8282": {
            "password": "password3"
        }
    },
    "method": "chacha20",
    "protocol": "origin",
    "protocol_param": "",
    "obfs": "plain",
    "obfs_param": "",
    "timeout": 120,
    "udp_timeout": 60,
    "fast_open": false,
    "workers": 2
}
Last modification:June 20th, 2020 at 10:41 am
如果觉得我的文章对你有用,请随意赞赏